IN PROCESS QUALITY CONTROL OF INJECTABLES
ENVIRONMENTAL CONTROL:- Traffic control: A carefully designed arrangement to control and minimize the traffic. Personnel should be permitted to enter aseptic areas only after following…
WATER FOR PHARMACEUTICAL PURPOSES
WATER FOR PHARMACEUTICAL PURPOSES INTRODUCTION:- Water is one of the major commodities used by pharmaceutical industry. It may be present as an excipient, or used…
QC TESTS FOR OINTMENTS AND CREAMS
OINTMENTS:- Ointments are homogeneous, semi-solid preparations intended for external application to the skin or mucous membranes. They are used as emollients or for the application…
IN-PROCESS CONTROL OF LIQUID ORALS
These are of two types:- Monophasic liquids. Ex:- Solutions, Syrups, Elixirs, etc. Biphasic liquids. Ex:- Emulsions, Suspensions. MONOPHASIC LIQUIDS:- CLEAN AND PURIFIED VEHICLE (WATER):-…
IN-PROCESS CONTROL OF CAPSULES
RAW MATERIALS:- The gelatin of the capsule shells should be assayed for various physical properties like bloom strength, viscosity , etc. MOISTURE PERMEATION TEST:- The…
BIOCHEMICAL OXYGEN DEMAND (BOD)
GENERAL:- In the presence of free oxygen, aerobic bacteria use the organic matter found in wastewater as “food”. The BOD test is an estimate of…
SOP FOR OPERATION AND CLEANING OF FRIABILATOR
1.0 PURPOSE:– To provide a written procedure for operation and cleaning of the Automated Friabilator. 2.0 SCOPE:- Applicable to determine Friability of tablets in Manufacturing.…
D VALUE, Z VALUE AND F VALUE
D Value, Z Value, F Value & 12-D process is also available as course for better understanding. View Course > Sterile:- Free from viable micro-organisms.…
ICH STABILITY ZONES
Four climatic zones can be distinguished for the purpose of worldwide stability as follows: Zone Type of Climate Zone I Temperate zone Zone II Mediterranean/subtropical…
QUALITY BY DESIGN (QBD)
Quality by Design is the modern approach for quality of pharmaceuticals. This paper gives idea about the Pharmaceutical Quality by Design (QbD) and describes use…
You must be logged in to post a comment.